TM 9-2320-363-34-1
EXHAUST MANIFOLD REPLACEMENT (CONT)
1.
REMOVE THREE NUTS (1), HEAT SHIELD (2), THREE STUD BOLTS (3), TWO BOLTS (4), AND
FIVE SPACERS (5) FROM EXHAUST MANIFOLD (6).
W A R N I N G
Exhaust manifold weighs 60 lb (27 kg). Use extreme caution during removal or
installation to prevent possible injury to personnel.
2
REMOVE REMAINING SEVEN BOLTS (4), SPACERS (5) AND EXHAUST MANIFOLD (6) FROM
CYLINDER HEAD (7).
N O T E
Each of the three gaskets is in two pieces.
3.
REMOVE AND DISCARD THREE GASKETS (8).
4.
SECURE CENTER SECTION OF EXHAUST MANIFOLD (6) IN SOFT JAWED VISE. USING BRASS
DRIFT, REMOVE EACH END SECTION (9) OF EXHAUST MANIFOLD.
5.
IF DAMAGED, REMOVE AND DISCARD FOUR TURBOCHARGER MOUNTING STUDS (10).
Use general cleaning methods to clean all parts (page 2-30).
3-70.2
Change 1
