TM 9-2320-363-24P
UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT
MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LISTS (RPSTL)
(INCLUDING DEPOT MAINTENANCE REPAIR PARTS)
Section I. INTRODUCTION
1.
SCOPE.
This Repair Parts and Special Tools Lists (RPSTL) lists and authorizes spares and repair parts; special tools; special
test, measurement, and diagnostic equipment (TMDE); and other special support equipment required for performance of
Unit, Direct Support, and General Support Maintenance of the M915 Family of Vehicles. It authorizes the requisitioning,
issue, and disposition of spares, repair parts, and special tools as indicated by the Source, Maintenance and
Recoverability (SMR) codes.
2.
GENERAL.
In addition to Section I, Introduction, this RPSTL is divided into the following sections:
a.
Section II, Repair Parts List. A list of spares and repair parts authorized by this RPSTL for use in the
performance of maintenance. The list also includes parts which must be removed for replacement of the authorized parts.
Parts lists are composed of functional groups in ascending alphanumeric sequence, with the parts in each group listed in
ascending figure and item number sequence. Bulk materials are listed by item name sequence at the end of the section.
Repair part kits are listed separately in their own functional group within Section II. Repair parts for reparable special
tools are also listed in this section Items listed are shown on the associated illustration(s)/figure(s).
b.
Section III, Special Tools List. A list of special tools, special TMDE, and other special support equipment
authorized by this RPSTL [as indicated by Basis of Issue (BOI) information in the DESCRIPTION AND USABLE ON
CODE (UOC) column] for the performance of maintenance.
c.
Section IV, Cross-reference Indexes. A list, in National Item Identification Number (NIIN) sequence, of all
National stock numbered items appearing in the listing, followed by a list in alphanumeric sequence of all part numbers
appearing in the listings. National Stock Numbers (NSN) and part numbers are cross-referenced to each illustration figure
and item number appearance.
3.
EXPLANATION OF COLUMNS (SECTIONS II AND III).
a.
ITEM NO - Column (1). Indicates the number used to identify items called out in the illustration.
b.
SMR CODE Column (2). The SMR code is a five-position code containing supply/requisitioning information,
maintenance category authorization criteria, and disposition Instruction, as shown in the following breakout:
Source Code
Maintenance Code
Recoverability Code
XXxxx
1st two positions
How you get an item
xxXXx
3d position
4th position
Who can install, replace or
Who can do complete
use the item.
repair* on the item.
xxxxX
5th position
Who determines disposition
action on an unserviceable item.
* Complete Repair: Maintenance capacity, capability, and authority to perform all corrective maintenance tasks of the
"Repair" function in a use/user environment in order to restore serviceability to a failed Item
1
