STEP/SEQUENCE
RESULT
WHAT TO DO NEXT
TM 9-2320-363-20-1
Section 4
TROUBLESHOOTING CHARTS
E.
FLASH CODE:
44
J1587 CODE:
P110 0 - COOLANT TEMPERATURE HIGH OR
P175 0 - OIL TEMPERATURE HIGH
P052 0 - INTERCOOLER TEMPERATURE HIGH
NOTE -
This chart is only to be used if:
1)
All basic mechanical checks and physical inspections have been performed with no problem found, and
2)
Diagnosis of DDEC-III was started at step Start-1, pg 3-345.41 and you have now been referred here.
When (Inactive Codes) are displayed on DDR, additional audit trail information is also shown. For an understanding of
this information refer to the example given in the Code 85 chart.
44-1
Multiple Code Check
Were there any other codes
Yes
Service other codes first.
besides 110/0, 17510, or 052/0?
Plug in reader and determine
No
This fault codes indicates
if code is coolant or
oil or coolant or intercooler
oil temperature high.
temperature was higher than it
should have been. Refer to engine
service manual to determine
potential causes for high oil
or coolant or Intercooler
temperatures.
Change 3 3-345.335
