STEP/SEQUENCE
RESULT
WHAT TO DO NEXT
TM 9-2320-363-20-1
Section 4
TROUBLESHOOTING CHARTS
D. CHART 14 - "CRUISE ACTIVE" LIGHT NEVER ON (Cont'd)
C 14-7
Check ECM
Connectors
Check terminals at both the 5-way
Terminals and
Reprogram ECM. Then go
power and vehicle harness
connectors are okay.
to C14-30.
connectors (both the ECM and
harness side) for damage; bent,
Problem found.
Repair terminals/connectors.
corroded, and unseated pins or
Then go to C14-30.
sockets, especially A2 and B3 of
the vehicle harness.
C 14-30
Verify Repairs
Turn ignition off.
"Cruise Active
Repairs are complete. Go to
Reconnect all connections
light comes on for
START-1, pg 3-345.41, if any
Turn ignition on
up to 5 seconds.
other problems are present.
Clear codes with DDR.
Then goes out.
Turn ignition off
Turn ignition on while at the same
"Cruise Active"
All system diagnostics are
time observing the "Cruise Active"
light does not
complete. Please review this
light.
comes on at all or
section from the first step to find
is always on.
the error.
Change 3 3-345.149
