STEP/SEQUENCE
RESULT
WHAT TO DO NEXT
C 13.4 Check ECM
Connectors
TM 9-2320-363-20-1
Section 4
TROUBLESHOOTING CHARTS
D. CHART 13 . "CRUISE ACTIVE" LIGHT ALWAYS ON IF SUPPLIED ON VEHICLE (Cont'd)
Turn ignition off.
Terminals
Reprogram ECM then go to
Disconnect the vehicle harness
and connectors
C13-30
connector at ECM.
are okay.
Check terminals at the vehicle
harness connectors (both ECM
Problem found
Repair terminals/connectors.
and harness side) for damage;
Then go to C13-30.
bent, corroded, and unseated
pins or sockets.
C 13-30 Determine "Cruise
Active" Light Status
Turn ignition off.
"Cruise Active"
C Repairs are complete. Go to
Reconnect all connectors.
light comes on for
START-1, pg 3-345.41, if any
Turn ignition on.
up to 5 seconds.
other problems are present.
Clear codes.
then goes out.
Turn ignition off.
Turn ignition on while at same
"Cruise Active",
All system diagnostics are
time observing the "Cruise Active"
light is always on
complete. Please review this
light.
or does not come
section from the first step to
on at all.
find error.
Change 3 3-345.143
