TM 9-2320-363-10
Table 2-1. Preventive Maintenance Checks and Services (PMCS)
for M915 Family of Vehicles (Con?).
Location
Item To
Item
Interval
Check/
Service
Not Fully Mission
No.
Procedure
Capable If:
18
During
Steering
Check for smooth steering
Steering is erratic,
without pulling to one side or
pulls, or has exces-
excessive play [more than 2½
sive play.
in. (6.4 cm)] in steering wheel.
19
During
Power
Train
a. Check for unusual noise or
a. Unusual noise or
vibration from engine, trans-
vibration is pre-
mission, transfer case (all
sent.
except
M915A2),
drive
shafts, axles, and wheels.
20
b. Check for smooth operation
b. Selector shifts with
of transfer case selector (all
difficulty or there is
except M915A2).
unusual noise.
During
Winch
(M916A1
and
M916A2)
Always wear heavy gloves when handling
winch wire rope. Never allow cable to run
through hands, as injury may result.
a. Check cable for kinks, frays, a. Cable is damaged
and breaks in wire. Check
or missing.
for inadequate lubrication or
corrosion. As required, clean
and lubricate cable when
mission is complete (Appen-
dix F).
b. Check winch for proper con-
b. There is no control
trol response.
response.
2-46
