TM 9-2320-363-10
1-1.
SCOPE (Con’t).
(2)
The M916A1 and M916A2 truck tractors are 6 X 6 prime
movers of low-bed semitrailers used primarily to transport heavy engineer equipment
over primary and secondary roads, and off-road, under worldwide climatic conditions
in a military environment.
(3)
The M917A1 and M917A1 w/MCS are 6 X 6 dump trucks
used to transport, dump, or spread asphalt, aggregate, dirt, and similar materials over
primary and secondary roads and off-road.
1-2.
MAINTENANCE FORMS AND PROCEDURES.
Department of the Army forms and procedures used for the equipment will
be those prescribed by DA Pam 738-750, Functional User’s Manual for the Army
Maintenance Management System (TAMMS), as contained in the Maintenance Man-
agement Update.
1-3.
CORROSION PREVENTION AND CONTROL (CPC).
a.
Corrosion Prevention and Control (CPC) of Army materiel is a con-
tinuing concern. It is important that any corrosion problems with this item be reported
so that the problem can be corrected and improvements can be made to prevent the
problem in future items.
b.
While corrosion is typically associated with rusting of metals, it can
also include deterioration of other materials, such as rubber and plastic. Unusual
cracking, softening, swelling, or breaking of these materials may be a corrosion prob-
lem. If a corrosion problem is identified, it can be reported using SF Form 368 (Prod-
uct Quality Deficiency Report). Use of key words such as “corrosion,” “rust,”
“deterioration,” or “cracking” will ensure that the information is identified as a CPC
problem. The form should be submitted to the address specified in DA Pam 738-750.
1-4.
DESTRUCTION OF ARMY MATERIEL TO PREVENT
ENEMY USE.
For destruction of Army materiel to prevent enemy use, refer to TM 750-
244-6.
1-2
