TM 9-2320-363-10
2-18. DRIVING TIPS (Cont).
(2)
With vehicle stopped, shift transfer case selector into LOW
range. Axle lock indicator light will come on and all-wheel drive is now engaged.
NOTE
All-wheel drive may be disengaged in two ways. Per-
form either step (3) or step (4) to disengage.
DO NOT operate vehicle if axle lock indicator light
stays on. Notify Unit Maintenance.
(3)
To disengage all-wheel drive when transfer case selector is
in LOW range, stop vehicle and move transfer case selector to HIGH range. All-
wheel drive is disengaged and axle lock indicator light will go off.
(4)
To disengage all-wheel drive when transfer case selector is
in HIGH range and all-wheel drive control valve lever is in ENGAGE position, move
all-wheel drive control valve lever to DISENGAGE position and remove foot from
accelerator.
2-19. DRIVING.
2-13).
a.
Perform initial adjustments, daily checks, and self-tests (paragraph
b.
Start engine (paragraph 2-14) and allow truck to warm up.
Serious injury may result if head clearance is not ads
quate while sitting in seat. Before driving or riding in
vehicle, ensure there is adequate clearance at maximum
upward travel of seat.
17).
c.
d.
e.
f.
g.
h.
Adjust seat (paragraph 2-5).
Adjust seat belt (paragraph 2-13).
Turn on lights, as necessary (paragraph 2-2).
Select transmission gear (paragraph 2-15).
Select transfer case position (paragraph (2-16).
For M917A1 and M917A1 w/MCS, select CTIS setting (paragraph 2-
2-96
