TM 9-2320-303-10
2-6.
ADDITIONAL CONTROLS AND INDICATORS (Con't).
Key
Control or Indicator
Function
4
Range Control and
Accident Recorder
Selection
When rotated, this control provides detection range
adjustment of the first alert between 3 and 2.125
seconds. Function may be configured to prevent range
adjustment control. Accident Reconstruction is initiated
by pushing and holding this knob for 5 seconds thereby
freezing the most recent data in half of the allocated
memory.
5
Light Sensor
Photo sensor that senses ambient lighting and adjusts
intensity of the indicator lights accordingly (i.e., increases
brightness of indicator lights in daytime and decreases
brightness of indicator lights at nighttime).
6
Red, Accompanied with
Yellow and Orange
This indicator illuminates when an object is detected at
<1 second with vehicle opening and no tone with vehicle
closing accompanied by audible tones. At a 1/2 second
or less following interval opening and closing, the tones
are repeated, twice per second.
7
Orange, Accompanied
with Yellow
This indicator illuminates when an object is detected
within a 3 second interval of vehicle opening or closing, 1
to 2 seconds following interval with vehicle opening and
no tone, and 1 to 2 seconds following interval with vehicle
closing accompanied by a tone.
8
Yellow
This indicator illuminates when an object is detected
within the system's maximum range. Maximum range is
350 feet on straight roads and is reduced on curved
roads by the road turn radius. It also illuminates when
the proximity alarm threshold is crossed.
9
Red, System Failure
Lights when a problem has been detected in the forward
looking radar system. A pattern of flashes blink out the
faults that are stored in memory when activated by
holding in the volume control knob for five seconds.
2-22
