TM 9-2320-302-34
0080 00-4
FORWARD-REAR AXLE DIFFERENTIAL CARRIER REPAIR - CONTINUED
0080 00
DISASSEMBLY - CONTINUED
12.
Rotate differential carrier (1) until yoke (9) faces up and install suitable lifting device through yoke (9).
NOTE
There are two notches on side of pinion differential case. When one is aligned with helical driven gear, pin-
ion differential case can be removed.
13.
Rotate input shaft (13) until one notch on pinion differential case (14) is aligned over helical driven gear (15).
14.
Lift input shaft (13) from differential carrier (1).
15.
Remove shims (16). Measure and record thickness of shim pack.
16.
Remove four socket head screws (17), cover (18), seal (19), and shift shaft (20). Discard seal.
17.
Remove adjusting screw (21) and jamnut (22) from differential carrier (1).
18.
Remove spring (23) from differential carrier (1).
19.
Remove side gear (24) with bearing cone (25), clutch (26), and fork (27) from differential carrier (1).
20.
Remove bearing cup (28) from differential carrier (1).
16
9
13
14
15
1
