TM 9-2320-302-34
0078 00-4
REAR AXLE REPLACEMENT - CONTINUED
0078 00
INSTALLATION - CONTINUED
9.
Install spider assembly (7) on axle housing (8) with eight washers (6), screws (5), washers (4), and new lock nuts (3).
Tighten lock nuts to 135-145 lb-ft (183-197 Nm).
10.
Connect two air lines (1) to brake chamber (2).
11.
Repeat steps 9 and 10 for opposite side of axle housing (8).
12.
Install rear shock absorbers (TM 9-2320-302-20).
13.
Install rear brakeshoes (TM 9-2320-302-20).
14.
Install drivelines (TM 9-2320-302-20).
15.
Fill axle with oil (TM 9-2320-302-20).
16.
Install rear ABS sensors (TM 9-2320-302-20).
17.
If new rear axle was installed, align tandem axles.
END OF WORK PACKAGE
1
8
7
3,4,5,6
2
