TM 9-2320-302-34
0073 00-1
FRONT AXLE CASTER ADJUSTMENT
0073 00
THIS WORK PACKAGE COVERS
Adjustment
INITIAL SETUP
Maintenance Level
Direct Support
Tools and Special Tools
Tool kit, general mechanic’s (Item 132, WP 0126 00)
Wrench, torque, 100-600 lb-ft (Item 140, WP 0126 00)
Wrench set, socket, 3/4 in drive (Item 141, WP
0126 00)
Materials/Parts
Compound, antiseize (Item 10, WP 0125 00)
ADJUSTMENT
NOTE
The following caster adjustment must be performed with the assistance of a local Freightliner dealer or a
supporting Contractor Logistic Support (CLS) maintenance activity.
1.
Measure caster angle. Angle must be +3.5 to +6.5 degrees.
NOTE
Perform steps 2 through 9 if caster angle is incorrect.
2.
Remove four nuts (1) and washers (2) from two U-bolts (3).
3
4
1
2
5
8
6
7
