TM 9-2320-302-34
0053 00-1
STARTER SOLENOID REPLACEMENT
0053 00
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Maintenance Level
Direct Support
Tools and Special Tools
Tool kit, general mechanic’s (Item 132, WP 0126 00)
Caps, vise jaw (Item 17, WP 0126 00)
Vise, machinist’s (Item 136, WP 0126 00)
Wrench, torque, 15-75 lb-ft (Item 138, WP 0126 00)
Materials/Parts
Washer, lock (P/N MS35333-42)
Adhesive, silicone (Item 4, WP 0125 00)
Equipment Condition
Starter removed (TM 9-2320-302-20)
REMOVAL
1.
Remove nut (1), lock washer (2), and wire (3) from starter solenoid (4). Discard lock washer.
2.
Remove nut (5) from starter solenoid (4).
3.
Hold nut (6) on starter motor (7) and remove nut (8) and jumper (9) from stud (10).
4.
Remove two screws (11).
5.
Pull starter solenoid (4) away from housing (12) and rotate so that mounting bracket (13) faces away from starter motor
(7).
12
7
6
10
9
8
13
5
1
2
3
11
4
