14.3
TROUBLESHOOTING FLASH CODE 14
[b] If code 110/3 is logged and any codes except code 110/4 are logged,
refer to section 14.3.4.
Figure 14-2
Temperature Sensor Circuits
14.3.3
Oil Temperature Sensor Check
Perform the following steps to check the oil temperature sensor (OTS).
1. Turn vehicle ignition OFF.
2. Disconnect OTS and install a jumper between OTS connector sockets A and B.
See Figure 14-3.
3. Turn ignition ON.
4. Read active codes.
[a] If code 175/4 is logged, refer to section 14.3.9.
All information subject to change without notice.
14-6
6SE497 9709 Copyright © 1997 DETROIT DIESEL CORPORATION
