10.15
TRANSMISSION INTERFACE FAULT
10.15.4 Verify Repairs
Perform the following steps to verify repairs. Start with the Menu Selection. An assistant is
needed for the following procedure.
1. Perform road test.
[a] If the problem is resolved, troubleshooting is complete.
[b] If the problem still exists, contact the OEM or transmission supplier. The steps that
led you here do not indicate a problem with the PWM #2 output or output wire.
Verify the correct configuration. Refer to the DDEC Application and Installation
manual, 7SA800, for the appropriate engine.
All information subject to change without notice.
10-70
6SE497 9709 Copyright © 1997 DETROIT DIESEL CORPORATION
