TM 9-2320-302-20
0217 00-1
CUP HOLDER REPLACEMENT
0217 00
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Tools and Special Tools
Tool kit, general mechanic’s (Item 36, WP 0236 00)
References
TM 9-2320-302-10
REMOVAL
1.
Remove two screws (1), flat washers (2), and L/H cup holder (3) from dash (4).
2.
Remove two screws (5), flat washers (6), and R/H cup holder (7) from swivel (8).
3.
Remove swivel (8) from dash (4).
INSTALLATION
1.
Install L/H cup holder (3) on dash (4) with two flat washers (2) and screws (1).
2.
Install swivel (8) on dash (4).
3.
Install R/H cup holder (7) on swivel (8) with two flat washers (6) and screws (5). Ensure R/H cup holder rotates freely.
END OF WORK PACKAGE
5,6,8
7
3
1,2
4
