TM 9-2320-302-20
0194 00-3
FRONT SPLASH GUARD AND FENDER EXTENSION MAINTENANCE - CONTINUED
0194 00
DISASSEMBLY - CONTINUED
4.
Remove lock nut (16), two washers (17), cap screw (20), and bracket (21). Discard lock nut.
5.
Remove lock nut (16), two washers (17), cap screws (22), two brackets (23 and 24), and brace (25) from bracket (26).
Discard lock nuts.
6.
Remove lock nut (16), two washers (17), cap screw (29), bracket (27), brace (28), and bracket (30) from bracket (26).
Discard lock nuts.
ASSEMBLY
1.
Install bracket (30), bracket (28), and bracket (27) on bracket (26). Secure in place with screw (29), two washers (17),
and new lock nut (16).
2.
Install brace (25) and brackets (24 and 23) on bracket (26). Secure in place with cap screw (22), two washers (17), and
new lock nut (16).
3.
Install bracket (21) on bracket (26) with screw (20), two washers (17), and new lock nut (16).
4.
Install bracket (19) on each bracket (24 and 30). Secure with cap screw (18), two washers (17), and new lock nut (16).
5.
Attach bracket (15) to front fender extension (4) and secure with screw (13), two washers (12 and 14), and new lock nut
(11).
6.
Attach front fender extension (4) to brackets (23 and 27) and secure in place with three screws (13), washers (14), wash-
ers (12), and new lock nuts (11).
7.
Install splash guard (5) and two braces (10) to fender extension and bracket assembly with six cap screws (9), 12 wash-
ers (8), four nuts (6), and two new lock nuts (7).
17
16
17
17
28
27
25
26
23
17
22
24
18
17
19
16
18
17
19
17
16
30
29
17
20
21
17
