TM 9-2320-302-20
0114 00-2
BATTERY BOX REPLACEMENT - CONTINUED
0114 00
REMOVAL - CONTINUED
NOTE
Perform step 3 at each side of battery box.
3.
Remove three nuts (6), six washers (7), three screws (8), and bracket (9) holding battery box (5) on bracket (10).
4.
Remove battery box (5) from vehicle and remove four plywood liners (11).
NOTE
Perform step 5 to remove each of two brackets from vehicle.
5.
Remove four nuts (12), washers (13), screws (14), and bracket (10) from vehicle.
INSTALLATION
NOTE
Perform step 1 to install each of two brackets to vehicle.
1.
Install bracket (10) on vehicle with four screws (14), washers (13), and nuts (12).
2.
Install four plywood liners (11) in battery box (5).
3.
Using suitable jack, position battery box on two brackets (10).
NOTE
Perform step 4 at each side of battery box.
4.
Install battery box (5) and bracket (9) on bracket (10) with three screws (8), six washers (7), and three nuts (6).
5.
Remove jack from battery box (5).
NOTE
Perform step 6 at each side of battery box.
6.
Install rubber latch assembly (4) on battery box (5) with screw (3), washer (2), and new kep nut (1).
7.
Install NATO slave receptacle (WP 0076 00).
8.
Install left step (WP 0172 00).
9.
Install battery hold-down pins and batteries (WP 0113 00).
