TM 9-2320-302-20
0107 00-3
REAR ANTI-LOCK BRAKE SYSTEM (ABS) SENSOR REPLACEMENT - CONTINUED
0107 00
REMOVAL - CONTINUED
INSTALLATION
1.
Install sensor assembly (11) through brake spider (12).
2.
Coat outside of sensor (9) with grease.
3.
Carefully install sensor (9) on mounting bracket (10) until sensor is stopped by ABS tone ring.
4.
Install drum (7) on axle (8).
5.
Connect ABS connector (5) to wiring harness connector (6).
6.
Install clamp (4) on ABS connector (5) and wiring harness connector (6).
7.
Install new tiedown straps (3) as needed to secure harnesses.
8.
Install two clamps (2) and secure with two new lock nuts (1).
11
9
10
12
1,2
