TM 9-2320-302-20
0022 00-2
OIL FILL TUBE MAINTENANCE - CONTINUED
0022 00
OIL FILL TUBE REMOVAL
1.
Remove lock nut (4), two washers (5), screw (6), and clamp (7) from standoff bracket (8). Discard lock nut.
2.
Loosen two hose clamps (9) and remove filler tube (3) and hose (10) from pipe coupling (11).
NOTE
Perform step 3 only if standoff bracket is damaged.
3.
Remove screw (12),washer (13), and standoff bracket (8) from engine block (14).
OIL FILLER HOLE COVER AND GASKET REMOVAL
1.
Remove pipe coupling (11) and nipple (15) from oil filler hole cover (16).
2.
Remove four screws (17), oil filler hole cover (16), and gasket (18) from engine block (14). Discard gasket.
OIL FILLER HOLE COVER AND GASKET INSTALLATION
NOTE
Ensure that all old gasket material has been removed from mounting surfaces.
2
3
1
8
5
4
13
12
5
6
7
9
10
9
11
15
17
16
18
14