TM 9-2320-302-10
0006 00-14
OPERATION UNDER UNUSUAL CONDITIONS - CONTINUED
0006 00
OPERATE ON SNOW OR ICE - CONTINUED
f.
Pull inside side chain (5) snug and hook into appropriate link to hold snug.
g.
Pull outside side chain (6) snug and hook.
NOTE
Hooks must be even. Same number of loose links must appear on each side of
chain. If uneven, loosen outside hook and rehook both inside and outside
hooks until they are even.
h.
Close cams (4) by inserting key (7) in slot and rotating 180 degrees clockwise. Start
with cam closest to side chain hook.
NOTE
All four cams should not have to be locked for chain to be tight.
i.
If additional tightening is required, tighten cam on opposite side of tire. Continue
tightening cams as required.
j.
If all four cams are tight and chain is not tight, loosen all four cams and resnug side
chain at fastener hook until no more than three cams require adjustment.
k.
Drive approximately 1/2 mile and readjust chains as required.
5
6
7
4
