TM 9-2320-283-20-3
STEERING SYSTEM.
3-215. LOWER STEERING COLUMN REPLACEMENT AND REPAIR (Continued).
LOCATION/ITEM
ACTION
REMARKS
B. DISASSEMBLY (Continued).
8. Eight bearings
Using suitable arbor press,
Press on one item (18)
(18).
remove from items (6), (20),
to remove opposite item
(9), and (12).
(18).
9. Yoke (20), two
Separate.
crosses (4), yoke
(6), yoke and tube
assembly (9), and
yoke (12).
10. Yoke (6) and yoke
a. Put alinement marks on
and tube assembly
each, if not already done.
(9).
b. Pull item (6) out of item
(9).
11. Fitting (8) and
Remove from item (9) and
two fittings (3).
two items (4).
C. CLEANING AND INSPECTION.
12. All parts.
Clean and inspect.
Refer to paragraph 3-4
and 3-5.
Use a fine
stone to remove light
scratch marks.
If item
(7) is damaged, pry up
tabs and remove from
item (9).
Install new
item (7) on item (9) and
stake tabs with a center
punch.
Replace items
(3), (4), (I7), and (18)
as a set.
13. Fitting (8) and
Check for thread or ball tip
two fittings (3).
damage, and replace as neces-
sary.
3-1286
