TM 9-2320-283-20-3
STEERING SYSTEM.
3-213. STEERING WHEEL REPLACEMENT (Continued).
LOCATION/ITEM
ACTION
REMARKS
A. REMOVAL.
1. Nut (1).
2. Wheel (2) and
shaft (4).
While holding item (2),
remove from item (4).
a. Put an alinement mark on
each, if not already done.
b. Using suitable puller or
Be careful not to damage
leather mallet, remove
item (2) from item (4).
item (3) if using puller
to remove item (2).
B. CLEANING AND INSPECTION.
3. All parts.
Clean and inspect.
Refer to paragraphs 3-4.
and 3-5.
C. INSTALLATION.
4. Wheel (2) and
a. Aline mark on item (2)
shaft (4).
with mark on item (4).
b. Gently seat item (2) onto
splines of item (4).
5. Nut (1).
Install onto item (4) and
Hold item (2), if
tighten.
necessary.
D. OPERATIONAL CHECK.
6. Engine.
Start.
Refer to TM 9-2320-283-
10.
3-1266
