TM  9-2320-283-20-3 Section II. ILLUSTRATED MANUFACTURING INSTRUCTIONS (Continued). STOCK  SIZE 1/2" OUTER DIAMETER MATERIAL  BLOCK DESCRIPTION STEERING  PUMP  HOSE SPECIFICATION STEERING    PUMP    HOSE    PART    NUMBER CUT ITEM TUBE OR HOSE LENGTH MANUFACTURED FROM (INCHES) NSN 1 5995198 54.00 208-8 2 5995197 39.00 208-8 END    FITTINGS    PART    NUMBER END   FITTING END   FITTING PART    NUMBER PART     NUMBER NONE NONE NONE NONE Figure  E-5.  1/2"  STEERING  PUMP  HOSE. MATERIAL  BLOCK STOCK  SIZE DESCRIPTION SPECIFICATION 5/8" OUTER DIAMETER HEATER HOSE HEATER    HOSE    PART    NUMBER END    FITTINGS    PART    NUMBER ITEM TUBE OR HOSE C U T MANUFACTURED LENGTH NO. PART NUMBER (INCHES) FROM END   FITTING END   FITTING NSN PART    NUMBER PART     NUMBER 1 5571141 11.00 M/145-20038 NONE NONE 2 MA145-20001 3.00 M/145-20038 NONE NONE 3 5571150 51.00 M/145-20038 NONE NONE 4 5571150 33.00 M/145-20038 NONE NONE INSTRUCTIONS: Figure E-6. 5/8" HEATER HOSE Determine hose part number needed from RPSTL and cut squarely to correct length as shown above. E-6