TM 9-2320-283-20-3
ACCESSORY ITEMS.
3-300. HEATER CONTROL PANEL REPLACEMENT (Continued).
LOCATION/ITEM
ACTION
B. INSTALLATION (Continued).
15. Five wires (6).
b. Wrap connections with
(continued).
electrical tape.
16. Valve (10).
Manually put in closed
position (counterclockwise).
REMARKS
17. Wire (9).
18. Screw (7) and
clip (8).
19. Two shutter and
rod assemblies
(15).
Put on item (10).
Secure item (9) to item
(10).
Put in closed position.
Push top item (15) up,
push bottom item (15)
down.
20. Wires (16) and
(19).
Put on two items (15).
21. Two clips (17).
Secure items (16) and (19)
to two items (15).
22. Two shutter and rod
Put in closed position.
assemblies (11).
23. Wires (13) and
(14).
Put on two items (11).
24. Two clips (12).
25. Panel (5).
26. Two screws (4).
27. New tie (18).
Secure items (13) and (14)
to two items (11).
Close.
Tighten.
Install on items (13), (14),
(16), (19), and (9).
NOTE
Follow-on maintenance action required:
Install manual reset circuit breaker
mounting bracket (para 3-114).
3-1758