TM 9-2320-283-20-3
ACCESSORY ITEMS.
3-299. HEATER BLOWER ASSEMBLY REPLACEMENT AND REPAIR (Continued).
LOCATION/ITEM
ACTION
REMARKS
C. CLEANING AND INSPECTION.
11. All parts.
Clean and inspect.
Refer to paragraphs 3-4
and 3-5.
D. ASSEMBLY.
12. Motor (6), bracket
Put in place on item (11).
(7), and bracket
(9).
13. Four nuts (5) and
Secure item (7) and item
terminal (8).
(9) to item (6).
14. Four screws (12).
Secure item (7) and item
(9) to item (11).
15. Wheel (4) and
Install on item (6).
End of shaft should be
wheel (10).
flush with hub of wheel
as shown.
16. Two setscrews
(17).
Tighten.
E. INSTALLATION.
17. Housing (11).
Put in place in item (16).
18. Four screws (12).
Secure item (11) to item
(16).
19. Three wires (3).
a. Put in place through item
(1).
b. Connect and wrap with
electrical tape.
20. Cover (13).
Put in place on item (16).
3-1750
