TM 9-2320-283-20-3
ACCESSORY ITEMS.
3-298. HEATER ASSEMBLY REPLACEMENT AND REPAIR (Continued).
LOCATION/ITEM
ACTION
REMARKS
B. DISASSEMBLY.
12. Heater blower
Remove.
Refer to paragraph
assembly.
3-299.
13. Grommet (19).
Remove from item (13).
14. Top shutter and
Rotate fully counterclockwise
rod assembly (18).
and lift up and out of hole
and notch in item (13).
15. Bottom shutter
Rotate fully counterclockwise
and rod assembly
and slide over and pull out
(17).
of hole and notch in item
(13).
CAUTION
Hold heater core in place when remov-
ing mounting screws.
Core can be
damaged if it should drop.
16. Four screws
(12).
a. Remove from item (13).
b. Pull water tubes of item
(14) from opening in two
items (10).
c. Remove item (14) from
item (13).
17. Two seals (10).
Remove from item (8).
Discared items (5).
18. Strips (11).
Remove from item (13).
Discard items (11).
19. Deflector (15).
Push in four tabs and push
from item (16).
C. CLEANING AND INSPECTION.
20. All parts.
Clean and inspect.
Refer to paragraphs 3-4
and 3-5.
3-1740