TM 9-2320-283-20-3
CAB AND BODY.
3-270. HOOD PANEL AND COMPONENT REPLACEMENT (Continued).
LOCATION/ITEM
ACTION
REMARKS
NOTE
Panel and hinge
assembly replacement
is the same for both sides.
17. Side panel.
Remove.
Refer to subparagraph A.
18. Pin (10).
Remove from item (13).
Discard item (10).
19. Pin (13), washer
Remove from item (11) and
Assistant holds item
(9),
and washer
item (7).
(12).
(7).
20. Fourteen screws
Remove from item (3) and
(1), twenty-eight item (7).
washers (2), and
fourteen nuts (6).
21. Panel and hinge
Remove from item (3).
assembly (7).
22. Panel and hinge
Put in place on item (3).
assembly (7).
Assistant hold in place.
23. Fourteen screws
Secure item (7) to item
(1), twenty-eight (3).
washers (2), and
fourteen nuts (6).
24. Pin (13), washer
Install in item (11) and
(9),
and washer
item (7).
(12).
25. New pin (10).
Install in item (13).
NOTE
Be sure decal (8) is on item (7) and
in good condition. To replace decal,
refer to paragraph 3-305.
26. Side panel.
Install.
Refer to subparagraph B.
3-1590
