TM 9-2320-283-20-3
CAB AND BODY.
3-257. GLOVE COMPARTMENT DOOR ASSEMBLY REPLACEMENT (Continued).
LOCATION/ITEM
ACTION
REMARKS
1. Glove compartment
Open.
door assembly
(6).
2. Five screws (7)
Remove.
and five lock-
washers (8).
3. Setscrews (2).
Loosen and remove.
4. Pawl (1).
Remove.
5. Push-on clip (3).
Remove.
Use small bladed screw-
driver.
6. Knob and shaft
assembly (5).
Remove.
7. Glove compartment
Aline with mounting.
door assembly (6).
8. Five screws (7)
Install and tighten.
and five lock-
washers (8).
9. Glove compartment
Insert item (5) through hole
latch assembly
in item (6) with index arrow
(4).
pointing up.
10. Push-on clip (3).
Force item (3) over shaft of
item (5) and seat firmly
Install with cup shaped
side out.
against inside of item (6)
panel.
3-1518
