TM 9-2320-283-20-3
WHEELS.
3-205. FRONT HUB, BEARINGS, AND SEALS REPLACEMENT (Continued).
LOCATION/ITEM
ACTION
REMARKS
NOTE
Replacement of front hub, bearings,
and seals is the same for both sides.
A. REMOVAL.
NOTE
Have a suitable container ready to
catch oil.
1. Plug (14).
Remove from item (15).
2. Six screws (11) and
Remove from item (15).
lockwashers (12).
Let oil drain.
3. Hubcap (15) and
gasket (16).
Remove from item (22).
Discard item (16).
NOTE
Plug (13) is an optional item.
4. Plug (13).
Remove from item (15).
5. Pin (18).
Remove from item (17).
Discard item (18).
6. Nut (17), washer
(19), cone (20),
Remove from item (1).
Use 2-1/4 inch hexagon
locknut wrench.
and hub (22).
7. Seal assembly (2)
Remove from item (22).
a. Tap out with hammer
and bearing cone
and drift.
(3).
NOTE
b. Discard item (2).
Only remove bearing cups to replace
them with new ones.
8. Cup (4) and cup
(21).
Remove from item (22).
a. Tap out with hammer
and drift.
b. Discard item (4) and
item (21).
3-1216
