TM 9-2320-283-20-3
FRAME AND TOWING ATTACHMENTS.
3-225. SUPPLY RESERVOIR MOUNTING BRACKETS REPLACEMENT (Continued).
LOCATION/ITEM
ACTION
REMARKS
1. Reservoir (12).
Support with safety stands or
tie to item (4) with rope.
2. Four nuts (1).
Remove from studs on two
items (10).
3. Two screws (9)
Remove from front item (11).
and nut (1).
4. Screw (8) and
nut (3).
5. Screw (9) and
nut (1).
Remove from item (5), item
(6), rear item (11), and
rear item (4).
Remove from item (6), rear
item (11), item (4), and item
(2).
NOTE
It may be necessary to loosen screws
holding air dryer mounting bracket (6)
to remove rear air
tank mounting
bracket.
6. Two brackets (11). Remove.
7. All parts.
Clean and inspect.
Refer to paragraphs 3-4
and 3-5.
8. Rear bracket (11).
Put in place between item (4)
and item (6).
9. Screw (8) and nut, Secure item (5), item (6),
(3).
and item (11) to item (4).
3-1346
