TM 9-2320-273-20
COMPRESSED AIR SYSTEM.
9-16. RESERVOIRS AND AIR LINES MAINTENANCE (Continued).
LOCATION/lTEM
ACTION
REMARKS
A. REMOVAL.
NOTE
As you remove each component, tag
for reassembly.
1. Air line(s) (10).
Disconnect.
2. Two nuts (1).
Loosen and remove.
3. Two bolts (2).
Remove.
4. Reservoir (3).
Slide forward or aft through
two sets of straps (7) and
remove.
5. All fittings on reservoir;
Unscrew and remove.
(plug{s) (4), reducer(s) (5),
valve(s) (6), elbow(s) (8),
connector(s) (9).
B. INSTALLATION.
NOTE
Check all lines and fittings for leaks,
cracks, and damaged threads. Replace,
if necessary. Be sure hoses are connect-
ed to the proper reservoir or valve ports
as you tagged at removal.
6. Plug(s) (4), reducer(s) (5),
Coat threads with liquid
valve(s) (6), elbow(s) (8)
teflon and install.
and connector(s) (9).
7. Reservoir (3).
Slide back into place through
two sets of straps (7).
8. TWO bolts (2).
Install one through each set
of straps (7).
9. Two nuts (1).
Install and tighten.
10. Air line(s) (10).
Reconnect.
9-52
