TM 9-2320-273-20
PUSHER AXLE.
8-15. PUSHER AXLE LIFT CYLINDERS MAINTENANCE (Continued).
LOCATION/lTEM
ACTION
REMARKS
B. INSTALLATION.
5. Two lift cylinders (5).
Place in position, Aline bolt
holes. Push studs through
brackets (1).
6. Four capscrews (3) with
Screw in and tighten.
washers (2).
7. Two nuts (7).
Screw on and tighten.
8. Two nuts (6).
Screw on and tighten.
9. Two elbows (9) and
a. Put liquid teflon on
air lines (8).
threads of elbows (9).
b. Screw on air lines (8)
and tighten.
C. OPERATIONAL CHECK.
10. Engine.
Start up (see TM 9-2320-273-
10).
11. Pusher axle.
Raise and lower (see TM 9-
2320-273-10). Check for
proper inflation and deflation
of both lift cylinders.
12. Engine.
Shut down (see TM 9-2320-273-
10).
8-36
