TM 9-2320-273-20
EXTERIOR LIGHTING.
5-55. TRAILER LIGHTS CONNECTOR MAINTENANCE (12 AND 24 VOLT) (Continued).
LOCATION/lTEM
ACTION
REMARKS
A.
REMOVAL (24 VOLT CONNECTOR) (Continued).
3. Connector assembly
Remove from mounting
(9).
plate (11).
B.
REMOVAL (12 VOLT CONNECTOR).
4. Rubber boot (7).
Twist and pull from back
Replace if cracked.
of connector assembly (8).
5. Seven terminal
Unscrew and remove wires.
Mark wires to facilitate
screws (6).
installation.
6. TwO bolts (5),
Remove.
washers (3), and
nuts (4).
7. Connector assembly
Remove from mounting
(10).
plate (11).
C.
INSPECTION (24 VOLT AND 12 VOLT).
8. Connectors assemblies
Inspect pin receptacles
Replace as necessary.
(9) and (10).
(24V) and pins (12V) for
corrosion.
D.
INSTALLATION (24 VOLT CONNECTOR).
9. Connector assembly
Mount into plate (11)
(9).
with four bolts (1) and
nuts (2). Tighten.
10. Connector assembly (8).
Push into back of connector
assembly (9) and screw on
ring.
E.
INSTALLATION (12 VOLT CONNECTOR).
11. Connector assembly
Mount into mounting plate
(10).
(11) with two bolts (5), wash-
ers (3}, and nuts (4). Tighten.
12. Seven terminal
Insert seven wires as marked
screws (6).
at removal and fasten with
screws (6). Tighten.
5-188
