TM 9-2320-273-20
CAB INTERIOR LIGHTINGAND SWITCHES.
5-58. TURN SIGNAL CONTROL MAINTENANCE (Continued).
LOCATION/lTEM
ACTION
REMARKS
A. REMOVAL (Continued).
7. Bolt (9) and
Remove from cable
washer (8).
clamp (7).
8. Turn signal control (5).
Remove from steering
column (14).
B. INSTALLATION.
9. Flare tab (12).
Place over pin and press down.
10. Handle (13) with bulb (4).
Install and twist to tighten.
11. Cover (3).
Install.
12. Two screws (2).
Install and tighten.
13. Turn signal control (5).
Aline and install on steering
column (14).
14. Strap (6) and two screws
Replace and tighten.
(11).
15. Connector (10).
Reconnect.
16. Cable clamp (7).
Aline.
17. Washer (8) and bolt (9).
Install and tighten.
C. OPERATIONAL CHECK.
18. OPERATION switch (1).
Set to Normal.
19. Directional signal
Place in down position and
handle (13).
observe that left green lamp
flashes.
Place handle in up position
and observe that right green
lamp flashes.
20. Flare tab (12).
Pull tab and observe that red
lamp flashes.
5-200
