TM 9-2320-273-20
BATTERIES AND ALTERNATOR.
5-37. DISCONNECT BATTERIES (Continued).
LOCATION/lTEM
ACTION
REMARKS
A. REMOVAL (Continued).
7. Cable(11).
Remove from terminal (9).
Replace hex nut (10) on
terminal (9).
B. INSTALLATION.
8. Hex nut (10).
Remove from terminal (9).
9. Cable(11).
Connect to terminal (9).
10. Hex nut (10).
Install and tighten.
11. Hex nut (7).
Remove from terminal (8).
12. Cable (6).
Connect to terminal (8).
13. Hex nut (7).
Install and tighten.
14. Hex nut (4).
Remove from terminal (5).
15. Cable (3).
Connect to terminal (5).
16. Hex nut (4).
Install and tighten.
NOTE
Check cables at terminal connections for
tightness; then, cover terminals with light
coat of lubricant.
17. Battery box cover (2).
Install.
18. Two battery box
Fasten to battery box
cover latches (1).
cover (2).
C. OPERATIONAL CHECK.
19. Engine.
Start up (see TM 9-2320-273-10).
If system fails to operate, check
connections for proper location
and tighteners.
20. Engine.
Shut down (see TM 9-2320-273-10).
5-114
