TM 9-2320-273-20
FUEL AND AIR INTAKE SYSTEM
4-16. FUEL SOLENOID SHUTOFF VALVE MAINTENANCE (Continued).
LOCATlON/lTEM
ACTION
REMARKS
A. REMOVAL (Continued).
4. Coil assembly (8), shield (7),
O-ring (6), spring washer (5),
and valve (4).
5. Two screws (1), and
two washers (2 and 3).
6. Valve (16), and gasket (15).
B. INSTALLATION.
7.
8.
9.
10.
11,
Gasket (15), valve (16),
two washers (2 and 3), and
two screws (1).
Coil assembly (8), shield (7),
O-ring (6), spring washer (5),
and valve (4).
Four mounting screws (12),
and washers (13).
Two wires (9).
Nuts (11), and washers (10).
C. OPERATIONAL CHECK.
a. Remove.
b. Throw away shield (7),
and O-ring (6).
Unscrew and remove.
a. Remove valve.
b. Throw away gasket.
a. Hold gasket (15) and
valve (16), in place and
insert two screws (1)
and washers (2 and 3).
b. Tighten screws (1).
Hold in place. Insert four
screws (12), and washers (13).
Tighten.
Attach to terminals (14).
Install on terminals and tighten.
12. INSTRUMENT PANEL/
engine run switch.
13. Coil assembly (8).
14. Engine.
15. Coil assembly (8).
Turn ON, and OFF again.
2nd mechanic.
Listen for click when
1st mechanic.
run switch is turned ON
or OFF.
Start up (see TM 9-2320-
Engine will not start unless
273-10).
solenoid is working.
Check valve for leaks.
4-40