TM 9-2320-273-20
Table 3-1. Unit Level Preventive Maintenance Checks And Services M915-M920
Item
No.
45
46
47
Interval
Annual
Annual
Annual
tern To Be
Inspected
Starter
Continued
Speed-
ometer
Pusher
Axle
Wheel
Bearing
(M920)
Procedure
WARNING
Adhesives, solvents, and sealing com-
pounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. To avoid injury or death,
keep away from fire and use in well-venti-
lated area. If adhesive, solvents, or seal-
ing compund get on skin or clothing,
wash immediately with soap and water.
c. Clean drive and drive spline and apply
a thin coat of grease (GAA).
Lubricate speedometer with GAA.
NOTE
Do not remove wheels from hubs. Use
truck wheel lift to remove wheels and hub
as an assembly.
NOTE
See paragraph 10-16
moval and installation.
for bearing re-
a. Remove, clean, and repack with GAA
the pusher axle wheel bearing.
Not Mission
Capable If:
3-10.22 Change 4
