TM 9-2320-273-20
B-3. COLUMN ENTRIES USED IN THE MAC (Continued).
f. Colurnn 6, Remarks. This column shall contain a letter code in alphabetical order which shall be
keyed to the remarks contained in section IV.
B-4. COLUMN ENTRIES USED IN TOOL AND TEST EQUIPMENT REQUIREMENTS.
a. Column 1, Tool or Test Equipment Reference Code. The tool and test equipment reference code
correlates with a maintenance function on the identified end item or component.
b. Column 2, Maintenance Level. The lowest level of maintenance authorized to use the tool or test
equipment.
c. Column 3, Nomenclature. Name or identification of the tool or test equipment.
d. Column 4, National/NATO Stock Number. The National or NATO stock number of the tool or
test equipment.
e. Column 5, Tool Number. The manufacturer’s part number.
B-5. EXPLANATION OF COLUMNS IN SECTION IV.
a. Reference Code. The code scheme recorded in column 6, section II.
b. Remarks.
This column lists information pertinent to the maintenance function being performed
as indicated on the MAC, section II.
B-3
