TM 9-2320-273-20
WINCH.
12-17. TAKING HYDRAULIC SYSTEM OIL SAMPLE.
THIS TASK COVERS: (APPROXIMATE TIME REQUIRED FOLLOWS TASK DESCRIPTION.)
a. Removal.
(0.4)
b. Installation.
(0.4)
c. Operational Check. (0.2)
1.0 Minutes Total.
INITIAL SETUP
EQUIPMENT CONDITION
APPLICABLE CONFIGURATIONS
PARAGRAPH
CONDITION DESCRIPTION
AlI
None.
None.
TEST EQUIPMENT
None.
SPECIAL TOOLS
None.
MATERIALS/PARTS (P/N)
Bushing, MS51847-1 (96906).
Bushing, MS51847-9 (96906).
Drain Cock, 7-2177-4 (86768).
Tape, Antiseizing Item 14, Appendix C.
PERSONNEL REQUIRED
SPECIAL ENVIRONMENTAL CONDITIONS
One (MOS-63B20).
Work Area Clean and Away from Blowing Dirt and Dust.
REFERENCES (TM)
TM 9-2320-273-20P.
TROUBLESHOOTING REFERENCES
None.
GENERAL SAFETY INSTRUCTIONS
Engine OFF.
Transmission in Neutral.
Vehicle on Level Ground.
Wheels Blocked.
12-50 Change 2
