TM 9-2320-273-20
WINCH.
12-14. HYDRAULIC MOTOR MAINTENANCE (Continued).
LOCATION/lTEM
ACTION
REMARKS
C. INSTALLATION AND OPERATIONAL CHECK (Continued).
10. Hydraulio motor (16).
Aline capscrews (18) and spline
shaft (12); push into position
against failsafe brake.
11. Two hex nuts (11).
Screw on to screws (18) and
tighten.
12. Five hydraulic line
a. Remove plugs.
connections: (4), (5),
b. Coat threads with liquid
(6), (7), and (17).
teflon.
c. Install and tighten as illus-
trated.
13. Winch rear cover (8).
Install with four screws (9)
and Iockwashers (10).
14. Engine.
Start up and engage PTO
(see TM 9-2320-273-10).
15. Winch.
Engage (see TM 9-2320-273-
10).
a. Check for leaks.
b. Disconnect PTO and shut
down engine (see TM 9-
2320-273-10).
16. Winch front cover (1).
Install with six Iockwashers
(2) and screws (3).
Tighten fittings as necessary.
12-38
