TM 9-2320-273-20
WINCH.
12-13. HYDRAULIC LINES AND FITTINGS MAINTENANCE (Continued).
LOCATION/lTEM
ACTION
REMARKS
B .
INSTALLATION (Continued).
5. Lower fitting (6).
a. Coat threads with
liquid teflon.
b. Unplug port and line.
Screw together and
tighten.
6. Upper fitting (4).
a. Coat threads with
liquid teflon.
b. Unplug port and line.
Screw together and
tighten.
7. Fill cap (1).
Screw on and tighten.
C. CHECKING FOR LEAKS
8. Engine.
Start up (see
TM 9-2320-273-10).
Engage PTO.
9. Line (5).
a. Wipe away dirt and
oil.
b. Check for leaks.
Retighten as necessary.
NOTE
After checking for leaks, use sight glasses
to check winch oil level. Add oil if neces-
sary (refer to LO 9-2320-273-12).
10. Engine.
Disengage PTO and shut
down (see TM 9-2320-
273-10).
11. Cover (3).
Set in place. Screw in
and tighten six cap-
screws (2).
12-32
