TM 9-2320-273-20
WINCH.
12-12. THROTTLE MAINTENANCE (Continued).
LOCATION/lTEM
ACTION
REMARKS
A. REMOVAL (Continued).
3. Cable wire (6).
a. Pull free from throttle arm
(8) and bracket (7).
b. Feed cable wire (6) down
underneath chassis.
4. Six screws (1).
a. Remove.
b. Remove winch panel cover
(2).
5. Nut (10), and star-
Remove from winch throttle
washer (9).
cable threaded end (11).
6. Winch throttle control
Pull up and out to remove
Feed cable from under chassis
(13).
cable (12).
up through winch control panel
carefully so as not to damage
c a b l e .
B. CLEANING AND INSPECTION.
7. Cable (12).
Wipe cable and threaded
ends clean and inspect for:
a. Cracks in cable exterior.
Replace as necessary.
b. Kinks which will cause
binding.
c. Crossed or burred threads.
C. INSTALLATION.
8. Winch throttle cable
Install with starwasher (9)
threaded end (11).
and nut (10). Tighten.
9. Cable (12).
Feed down under chassis
over cross frame brace, and
up into engine compartment.
10. Cable wire (6).
Insert through bracket (7)
and into throttle arm (8).
11. Setscrew (3).
Tighten into cable wire (6).
12. Winch paneI cover (2).
Install with six screws (1).
12-26
