TM 9-2320-273-20
WINCH.
12-8. WINCH CABLE MAINTENANCE (Continued).
LOCATION/lTEM
ACTION
R E M A R K S -
1. Cable (1).
Unreel from drum (2).
Refer to TM 9-2320-273-10.
2. Nuts (3).
Remove.
3. U-bolt (4).
Remove.
B.
INSTALLATION.
4. U-bolt (4).
Install through holes on
side of drum.
5. Nuts (3).
Screw onto U-bolt (4). Do not
tighten at this time.
6. Cable (1).
Slide unswaged end of cable
between U-bolt (4) and drum
(2). Cable should protrude
approximately 1.00 inch.
7. Nuts (3).
Tighten.
8. Cable (1).
Rewind on drum (2).
Refer to TM 9-2320-273-10.
TA 075306
12-11
