TM 9-2320-273-20
BODY AND CAB.
11-25. REAR VIEW MIRROR MAINTENANCE (Continued).
LOCATION/lTEM
ACTION
REMARKS
B. DISASSEMBLY.
3.
4.
5.
6.
7.
8.
9.
Two acorn nuts (13).
Two tube clamps (16),
two Iockwashers (20) and
spacers (21).
Mirror assembly (23).
Capscrew (12), acorn nut
(17) and Iockwasher (18).
Two acorn nuts (6).
Loop detent assembly (14).
bracket (upper) (3), bracket
(lower) (4) and two
compression springs (7).
Cross brace bracket (9) and
loop cross brace (11).
C. ASSEMBLY.
10.
11.
12.
13.
14.
15.
16.
Cross brace bracket (9) and
loop cross brace (11).
Two compression springs
(7), loop detent assembly
(14), bracket (upper) (3)
and bracket (lower) (4).
Two acorn nuts (6).
Capscrew (12), acorn nut
(17), and Iockwasher (18).
Two tube clamps (16),
Two acorn nuts (13).
Mirror assembly (23).
D. INSTALLATION.
Loosen and remove.
Remove.
Pull free from face of mirror
head assembly (15).
Loosen and remove.
Loosen and remove.
Remove from pivot rod (8).
Remove by unthreading two
outer jam nuts (10) and remov-
ing from pivot rod (8).
Install on pivot rod (8) and
secure with jam nuts (10).
Install on pivot rod (8).
Install and tighten.
Install to fasten loop cross
brace (1 1) to tube clamp
(19) and tighten.
Position mirror head assembly
(15) and pivot tube clamps
over screws (22) to secure.
Install and tighten.
Stick onto face of mirror head
assembly (15).
17. Mirror assembly (5).
18. Six bolts (1) and lock-
washers (2).
Position on door and aline
mounting holes.
Install and tighten.
If damaged.
If removed.
11-82
