TM 9-2320-273-20
BODY AND CAB.
11-16. GRILLE AND BRUSH GUARD MAINTENANCE (Continued).
LOCATION/lTEM
ACTION
REMARKS
B. DISASSEMBLY.
3.
4.
5.
Rail (1) two fillers (2),
two fillers (9), and two
rails (10).
Twenty-three capscrews (6)
and plates (7).
Two tap screws (22) and
plate (23).
C. ASSEMBLY.
6. Plate (23).
7. Screen (5).
8. Rail (l), two fillers (2), two
fillers (9), and two rails (10).
D. INSTALLATION.
9. Grille (4).
10. Screen (21).
11. Grille (4).
12. Install brush guard.
Drill out rivets (3) and remove.
Unscrew and remove screen
Unscrew and remove.
5).
Fasten to grille (4) with two tap
screws (22).
Aline with grille (4) and attach
with twenty-three capscrews (6)
and plates (7).
Install to grille (4) with new
rivets (3).
Position on truck.
Install with two bolts (14), washers
(13), brackets (12), and nuts (11).
Install with sixteen capscrews (24),
Iockwashers (25) and washers (26).
Refer to para 11-16F.
E. BRUSH GUARD REMOVAL (M916 thru M920 only).
13. Eight screws (1 5), washers
(16), and nuts (17).
Unscrew and remove two brackets
(18) and braces (19).
14, Eight screws (15), washers
Unscrew and remove brush guard
(16), and nuts (17).
(20) from front bumper.
F. BRUSH GUARD INSTALLATION (M916 thru M920 only).
15. Brush guard (20).
Aline with mounting holes on top
of bumper and secure with eight
screws (15), washers (16), and
nuts (17).
16. Two braces (19) and
Aline with mounting holes at
brackets (18).
front fenders and brush guard
(20) and secure with eight screws
(15), washers (16), and nuts (17).
It is not necessary to
remove steel spring nuts
(8) unless they are broken.
Replace any broken steel
spring nuts (8) as needed.
Top of grille must be
tipped forward to install
bolts (M916 thru M920).
M916 thru M920 only.
11-50
