TM 9-2320-273-20
FRAME.
11-12. SPARE TIRE HOIST MAINTENANCE (Continued).
LOCATION/lTEM
ACTION
REMARKS
A. REMOVAL (Continued).
4. Screw (23) and locknut (20).
Unscrew and remove frame
spacer (19) and drum assem-
bly (18).
5. Retaining ring (8).
Remove, slide pinion shaft
assembly (7) to side and
remove brake face (6), and
ratchet gear (5).
6. Ratchet bolt (16) and
Unscrew and remove ratchet
locknut (12).
spring (13), ratchet spacer
(14), and ratchet pawl (15).
7. Bushings (9), and (11).
Remove.
8. Cotter pin (30) and
Remove and unscrew
Discard cotter pin.
clevis pin (31).
clevis (36) from tension
rod (37).
9. Three nuts (38) and (39).
Unscrew and remove tension
Nut (38) attaches to clevis
rod (37) from tension rod
(36) and two nuts (39) attach
support assy (40) and clevis
at either side of tension rod
(36).
support assy (40).
10. Tie down (25) and two
Unscrew and remove pedestal
pedestal mounting nuts (24).
(26).
11, Two bolts (32), washers
Unscrew and remove two
(34), and nuts (35).
cable rollers (33).
12. Two bolts (28) and nuts
Unscrew and remove carrier
(27).
(29).
B. INSTALLATION.
13. Carrier (29),
Install with two bolts (28)
and nuts (27).
14. Two cable rollers (33).
Install to pedestal (26) with
two bolts (32), washers (34),
and nuts (35).
15. Pedestal (26).
Install with tie down (25) and
two pedestal mounting nuts (24).
16. Tension Rod (37).
Install with three nuts (38) and Nut (38) attaches to clevis
(39) to tension rod support
(36) and two nuts (39) attach
assy (40) and clevis (36).
at either side of tension rod
support assy (40).
17. Clevis (36).
Screw onto tension rod (37) and
fasten to pedestal with clevis pin
(31) and new cotter pin (30).
18. Bushings (9) and (11).
Install in frame (10).
11-24
