TM 9-2320-273-20
11-8. BODY AND CAB MAINTENANCE TASK SUMMARY.
INITIAL SETUP
EQUIPMENT CONDITION
APPLICABLE CONFIGURATIONS
PARAGRAPH
CONDITION DESCRIPTION
All.
11-26A.
Heater Removed.
11-14A or C.
Fenders Removed.
TEST EQUIPMENT
11-20A and 11-21A.
Seats Removed.
None.
4-25A.
Air Cleaner Removed.
4-42A.
Coolant Drained.
TOOLS
5-44A.
Headlamp Assembly
None.
Removed.
11-16E.
Brush Guard Removed
MATERIALS/PARTS (P/N)
(M916 Thru M920)
Lubriplate (Refer to Appendix C).
11-16A.
Grille Removed.
GAA (Refer to Appendix C).
11-32A.
Hood Removed.
Non Flammable Cleaning Solvent (SD-2)
11-19A.
Mud Flaps Removed.
(Refer to Appendix C).
11-9A.
Tow Eyes Removed,
Cotter Pin, 137155 (24617)
5-50A.
Blackout Taillamps
Rivet (10), SSLQ-66 (05693).
Removed.
Rivet (30), SSLQ-64 (05693).
Grease Gun.
Electrical Tape.
Clean Container.
Hose Tie (3), PLT 4H-MO (06363).
Hoist.
Jack Stands.
PERSONNEL REQUIRED
SPECIAL ENVIRONMENTAL CONDITIONS
Two (MOS-63B20).
Vehicle Parked on Level Ground.
REFERENCES (TM
GENERAL SAFETY INSTRUCTIONS
TM 9-2320-273-10.
Engine OFF.
LO 9-2320-273-12.
Transmission in Neutral.
TM 9-2320-273-20P.
Park Brake Set.
REFERENCES (TROUBLESHOOTING)
Table 4-1.
LIST OF TASKS
TASK
TASK
TROUBLESHOOTING
NO.
TASK
REF
REF (TABLE)
1.
Fender Maintenance:
11-14
A. Removal of Front Fender (M915).
11-14A
B. Installation of Front Fender (M915).
11-14B
C. Removal of Front Fender (M916
thru M920).
11-14C
D. Installation of Front Fender (M916
thru M920).
11-14D
E. Removal of Rear Fender.
11-14E
F. Installation of Rear Fender.
11-14F
11-8
