TM 9-2320-273-20
WHEELS AND TIRES.
10-13. FRONT WHEEL BEARINGS AND SEALS MAINTENANCE (M915) (Continued).
LOCATION/lTEM
ACTION
REMARKS
22. Lockring (12).
Install.
23. Washer (11).
Slide over axle.
24. Locknut (10).
a. Install.
b. Torque to 125 Ib-ft
(169.5 N•m).
25. Washer (11).
Bend tabs over nut (10).
26. Deleted.
27. Gasket (9) and hubcap (8).
Align with hub (1).
28. Six capscrews (6) and
washers (5
29. Drum (7).
a. Install.
b. Torque to 9-12 Ib-ft
(12-16 N•m).
Place over hub (1) and seat
into position by installing
two nuts equally spaced, then
remove nuts and install tire
and wheel assembly. Re-
install lug nuts and torque
lug nuts to 450 Ib-ft (610
N•m) (see TM 9-2320-273-10).
30. Remove jack.
Road test vehicle.
NOTE
Follow-on maintenance action required:
Install wheel and tire, road test vehicle,
refer to TM 9-2320-273-10.
Adjust nut (13) to slip into
nearest hole in Iockring (12).
See inset for sequence.
Lug nuts on left side of vehicle
are left-handed threads.
Change 2 10-44.1/10-44.2 (blank)
