TM 9-2320-273-20
INITIAL SETUP
EQUIPMENT
APPLICABLE CONFIGURATIONS
CONDITION PARAGRAPH
CONDITION DESCRIPTION
All.
5-67A.
Horn Button Assembly Removed.
11-14A or C.
Front Fenders Removed.
TEST EQUIPMENT
11-16A.
Grille Removed.
None.
5-37A.
Batteries Disconnected.
4-18A.
Fuel Filter and Adapter Removed.
SPECIAL TOOLS
(M916 thru M920).
None.
MATERIALS/PARTS (P/N)
GAA (Refer to Appendix C).
Balljoint Puller.
Nonflammable Cleaning Solvent SD-2 (Refer to Appendix C).
Jack Stands.
Cotter Pin, 103415 (24617).
Power Steering Fluid (Refer to Appendix C).
Cotter Pin, 103389 (24617).
Liquid Teflon (Refer to Appendix C).
Snapring, 100475 (15434).
Clean Container (Quart).
Gasket, Oil Pump to Adapter (5330-01-071-5727).
Grease Gun.
O-Ring, 008771-026 (19954).
Plugs.
Wheel Puller.
Cable Tie, PLT4H-MO (06383).
Silicone RTV Sealant (Refer to Appendix C).
Cable Tie, MS-3367-2-O (96906).
Cotter Pin (2), K-2616 (78500).
PERSONNEL REQUIRED
One or Two MOS-63B20).
REFERENCES (TM)
SPECIAL ENVIRONMENTAL CONDITIONS
TM 9-2320-273-10.
Vehicle Parked on Level Ground.
LO 9-2320-273-12.
TM 9-2320-273-20P.
GENERAL SAFETY INSTRUCTIONS
REFERENCES (TROUBLESHOOTING)
Engine OFF.
Table 10-2.
Transmission in Neutral.
Park Brake Set.
LIST OF TASKS
TASK
TASK
TROUBLESHOOTING
NO.
TASK
REF
REF (TABLE)
1.
Steering Wheel Maintenance:
10-17
10-2
A.
Removal.
10-17A
B.
Installation.
10-17B
C.
Operational Check.
10-17C
2.
Lower Steering Shaft Maintenance:
10-18
10-2
A.
Removal.
10-18A
B.
Disassembly.
10-18B
C.
Assembly.
10-18C
10-16
10-8. STEERING MECHANISM MAINTENANCE TASK SUMMARY.
